Motorola roundie

[Yamamaya42]

Originally Posted by timmy

Would v6 have anything to do with this color issue because I have a resistor on pin 8 2.7meg but it’s up to 3.9meg , Searching for any other bad resistors.

Doubtful.

What I still find odd, are the abnormal voltages you posted, and what may be the cause.

V21 pin 9 @ -44 , should be -130v
V4 pin 3 @ - 1.71v should be -10v
V19 pin 9 @ -40v should be -75v

[timmy]

Originally Posted by Yamamaya42

Doubtful.

What I still find odd, are the abnormal voltages you posted, and what may be the cause.

V21 pin 9 @ -44 , should be -130v
V4 pin 3 @ - 1.71v should be -10v
V19 pin 9 @ -40v should be -75v

The v4 pin 3 -1.71 was flashing
And the 2 resistors and the .01 from the coil on the flyback to the burst gate are good.