Help with piccolo j-310 pincushion

[zeno]

This cap had a pretty high failure rate in older sets. I think it was ready to go
& blew on power up. The replacements wont work, they are the wrong type.
We used the OEM replacements as NP caps were hard to find.
Keep in mind the hoz out spikes can be quite high & lots of current.
Example is on a 25" TV the hoz out B+ is @120 volts but the spikes are
@ 1 KV
So I think the right type of cap will fix it maybe the PIN problem also.

73 Zeno
LFOD !