|
|
|
#14
11-10-2023, 04:05 PM
|
|||
|
|||
|
I tried bypassing the can for that cap, using a 12uF / 500v replacement. I monitored B+ at L22 on startup. Voltage climbs rapidly to about 295, then over about 10 secs lowers and stabilizes at 269. No hint of picture, and today I'm also not hearing H oscillator whine. Tried 3 times, same results.
Yesterday I had one good startup with picture, getting 379 B+ at L22, before it died down after a few minutes to 269 and picture went away. Any other electrolytics I should try bypassing? 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode