|
I have B+, in fact, it's right on the money. I can't induce noise in the audio anyplace. I'm wondering if the cable from the chassis to the tuner is open. I should be able to inject noise into that cable and hear it in the speakers. The emissions on the CRT have come up considerably since I ran it for a couple hours with just the filaments hot. Cutoff is reasonable and the emissions have gone up to 400 with 300 being minimum acceptable on my tester. I seen to have lost high voltage. I tried the Shango "spark jump" test and got nothing. This thing has more than one problem.
|
12-22-2023, 06:02 PM
Threaded Mode