|
|
|
#5
12-22-2023, 08:18 PM
|
||||
|
||||
|
A common problem back in the day with these sets was burnout of the filament of the half of the 6GH8 used as the AGC keyer. Magnavox put full B+ on the cathode and any slight leakage to the grounded filament blew it out. Also, make sure all 3 IF tubes are lighted, sometimes hard to tell with their shields on. Since you have the combo model, the 6GC5 audio output tube is only being used as a voltage divider, supplies B+ to the tuner and the IFs.
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode