Convergence ?

[Yamamaya42]

I replaced the Vert tube June 22 with a NOS 6GF7A, that was the last time it was converged.

Perhaps the tube has broken in a bit, and things are slightly off now, who knows.
blue static is very slightly above R/G, and R/G are not as good as they could be.


R/G vert top is also a bit off again :/

[old_tv_nut]

Originally Posted by Yamamaya42

I replaced the Vert tube June 22 with a NOS 6GF7A, that was the last time it was converged.

Perhaps the tube has broken in a bit, and things are slightly off now, who knows.
blue static is very slightly above R/G, and R/G are not as good as they could be.


R/G vert top is also a bit off again :/

Convergence can be affected by vertical height and linearity. I would check those first before touching the convergence controls.

[Yamamaya42]

Originally Posted by old_tv_nut

Convergence can be affected by vertical height and linearity. I would check those first before touching the convergence controls.

That would no doubt be the first step I check, but i co have no doubt i will have to touch things up again.