Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-08-2024, 09:58 PM
Kevin Kuehn's Avatar
Kevin Kuehn Kevin Kuehn is offline
Workin' Late Again
 
Join Date: Jan 2011
Location: WI
Posts: 3,976
Quote:
Originally Posted by Chris K View Post
I'm a moron.



Never mind. Ancient and unreliable test equipment. Lesson learned.
Besides the generator, it never helps to lean the CRT up against a piece of test equipment with a huge 60 hz isolation transformer inside. After all the CRT is magnetically deflected.
Reply With Quote
  #2  
Old 02-09-2024, 01:50 AM
Electronic M's Avatar
Electronic M Electronic M is offline
M is for Memory
 
Join Date: Jan 2011
Location: Pewaukee/Delafield Wi
Posts: 15,473
Quote:
Originally Posted by Kevin Kuehn View Post
Besides the generator, it never helps to lean the CRT up against a piece of test equipment with a huge 60 hz isolation transformer inside. After all the CRT is magnetically deflected.
Not to pile on but I've also seen changes in deflection setup when running sets that early on their sides....I kinda learned the hard way that if the original settings give somewhat reasonable picture with the set on its side don't try to tweak to perfection with the set on its side as the change in position relative to earths magnetic field will throw several things slightly off when turned upright....
Similarly on color sets try to have the set facing the same compass direction as you plan to store and use it in when doing scan setup and purity and convergence.
__________________
Tom C.

Zenith: The quality stays in EVEN after the name falls off!
What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
Reply With Quote
  #3  
Old 02-09-2024, 09:10 AM
old_coot88 old_coot88 is offline
VideoKarma Member
 
Join Date: Sep 2009
Posts: 2,653
Quote:
Originally Posted by Electronic M View Post
Similarly on color sets try to have the set facing the same compass direction as you plan to store and use it in when doing scan setup and purity and convergence.
This was a major point with pre-autodegauss sets (e.g., RCA CTC-15 and prior).
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:39 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.