admiral 24c15 with 20b1 chassis attempt at restore

[bandersen]

Originally Posted by Penthode

I still see the dark vertical bands on the left which could be due to a ringing in the first half of the sweep (inefficient horizontal damping?) or the damped flyback somehow modulating the video (poor power supply decoupling or filtering). This is something an oscilloscope would see.

I'm not seeing any dark vertical bands at all. Are you referring to the test pattern image a few posts above?

Sure looks to me that there is sufficient width and the squares on the far right are not quite as wide as those on the far left.
That's why I keep saying it's a linearity issue and you need to adjust the drive/linearity/width controls.

Don't mess with anything under that metal shield. Those parts have nothing to do with centering the image.

Also, why are you trying to get the picture tube out?