Ok. Let’s try this again…RCA 9TC240 Alignment

[bandersen]

I suggest you move on to the other stages of the sound IF and come back to this. If the other stages are off it would effect the discriminator response. I usually do this last or come back to it again for a final touch up.

[Chris K]

Originally Posted by bandersen

I suggest you move on to the other stages of the sound IF and come back to this. If the other stages are off it would effect the discriminator response. I usually do this last or come back to it again for a final touch up.

OK I'll play around with it a bit. BTW, the sweep/gen was set for 300mV output and not 1.0 volts. Just trying how to figure out how to read and adjust this.