GE M935AWL restoration

[bandersen]

Originally Posted by Yamamaya42

BTW, those chassis clips are a royal pain to get back in there right and tightened down, it's understandable why they were just left in there like that!

These things?


Looks like there was some trouble with the focus pin. Wire is directly soldered to the CRT pin!


Decided to pull the chassis so I could give it a good look over.
Crazy clean underneath. No obvious signs of any old repairs.




Yes, the circuit breaker is open. There's also a split bumblebee right across the AC line.

I suspect the thermistor or VDR are bad as well since the degaussing coil was disconnected. Oh yeah, I can see a detached lead in the photo!
Are compatible parts even made anymore?