Early 80's Magnavox Console - Help with Schematics?

[damen]

Sams didn't use Magnavox model numbers on most of their tube and early solid state sets. Use the chassis number. Normally it's on a small trading stamp size sticker pasted to the back apron on the chassis. May start with "U", "RA", "TA".

[zeno]

Originally Posted by damen

Sams didn't use Magnavox model numbers on most of their tube and early solid state sets. Use the chassis number. Normally it's on a small trading stamp size sticker pasted to the back apron on the chassis. May start with "U", "RA", "TA".

Ditto
Early 80's probably a C-5 or C-6. more ##'s after like C501-00-AB.
Lots of cold joints on them around the HV.

Zeno
LFOD !

[firebirdta84]

The chassis number is T815-09. Photofacts only lists:

T81501AA
T81502AA
T81503AA
T81513AA

The first three translate to Sams 1860-1, the last one to 2239-2, but I am not sure its what I need.

I was able to determine this TV is from 1980 or 1981.

Thanks!

[vol.2]

Originally Posted by firebirdta84

The chassis number is T815-09. Photofacts only lists:

T81501AA
T81502AA
T81503AA
T81513AA

The first three translate to Sams 1860-1, the last one to 2239-2, but I am not sure its what I need.

I was able to determine this TV is from 1980 or 1981.

Thanks!

Entering your model number with no other information into a search bar yields https://www.antiqueradios.com/forums....php?p=3562618

Someone explains exactly which Sams you need in that thread. Good luck.

[zeno]

T815 was the older module sets. Much better & easier than the C5 & C6.
Date code some large OEM parts, wk/yy to date. I would bet its a
late production so the highest SAMS probably closest.

Zeno