![]() |
|
|
|
#1
|
||||
|
||||
|
Thanks for the advice. I see what you mean about that ground strap. It's actually easy to get the sweep chassis out.
Undo the ground strap, disconnect CRT and yoke plugs and remove one screw. ![]() What I really find curious is the tube lineup. The Sams service info shows a 6CG7 horizontal oscillator tube down there which makes sense However, this version has a 10DE7 vertical tube down there while the 6CG7 is up top with the sync and video out tubes. ![]() I had been wondering where the electrolytics caps were hiding. Found them! That's one big ass cap. ![]() Loads of gooey wax caps to replace. ![]() Clearly some work had been done. Seleniums have been replaced with solid state diodes and there are a couple Sprague Atoms. I'm thinking early 80s? ![]() Finally, here's the tiny flyback.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|