|
Yes I saw your Patreon post. I will definitely check it out. I did get the schematic file but the power boards 1 and 2 are just labeled blocks on the print out. Not HP parts…I did figure out the issue with the 24V DC supply board is with the transformer. When it’s powered up there’s 150V DC on the main filter cap but nothing downstream of the transformer. The electrolytic is holding that voltage for an insane amount of time. It only dropped 10 volts in 24 hours of sitting. Strange…never had a cap do that
|
06-13-2025, 07:58 PM
Threaded Mode