Rare find! A Magnavox Brittany tv!

[Yamamaya42]

A test of the CRT mounted in the cabinet, using the OEM speaker.

http://suzaku.live-evil.org/0715252030.mp4

Ion trap is adjusted correctly now.

I tried a 1w 1.2k resistor in parallel with the focus coil, did not last long burned up fast. will try a 2k 5-10w later.

still have to adjust screen geometry and stuff once all is said and done.

[timmy]

Originally Posted by Yamamaya42

A test of the CRT mounted in the cabinet, using the OEM speaker.

http://suzaku.live-evil.org/0715252030.mp4

Ion trap is adjusted correctly now.

I tried a 1w 1.2k resistor in parallel with the focus coil, did not last long burned up fast. will try a 2k 5-10w later.

still have to adjust screen geometry and stuff once all is said and done.

This pic shows horizontal drive a bit high with the white line down the center.

[Yamamaya42]

Originally Posted by timmy

This pic shows horizontal drive a bit high with the white line down the center.

no horizontal drive adjustment on this chassis, just width and linearity.

[timmy]

Originally Posted by Yamamaya42

no horizontal drive adjustment on this chassis, just width and linearity.

Ok well the the frequency is off a bit to give you the white line.