Two Way Hourglass Bends on My KCS47

[Chris K]

This yoke made a straight edged picture in the original tv in other words, if I had harvested the 16GP4 from the maple set and installed it in my original dark cabinet, as was the plan, it would e the exact same situation. When I got the maple tv with the strong CRT, it had its original yoke and chassis. I took my restored chassis from the original tv and put it in the maple tv but left in the yoke that was in the maple producing the small crooked but straight edged picture. I couldn’t get that yoke to produce a full screen picture so I pulled the yoke from the original tv. This chassis yoke combo produced a dim but straight edged picture in the old set with the weak CRT. I don’t know what could possibly be different other than I didn’t put the yoke in correctly when I did the swap