Avante On/Off issue

[TinCanAlley]

Could it be this simple? I'm guessing not as nothing ever is, but you never know. According to the SM, it's a ceramic capacitor. I wish there were all the electronic places around now as they were when I was younger. I could be out and back with it in less than 30 minutes. Now I have to order and pay shipping. Need to keep a running list of components I want/need so when times like this come up, I have a full order to make it a bit less painful.

[vol.2]

Originally Posted by TinCanAlley

I could be out and back with it in less than 30 minutes. Now I have to order and pay shipping. Need to keep a running list of components I want/need so when times like this come up, I have a full order to make it a bit less painful.

I keep a big box full of old PCB ewaste for this. Usually can just find something in there if it's just a onesie-twosie.

A .01uf ceramic will say 103 on it. Very, very common on lots of boards. Should be able to use a film or lytic there as long as it's 100V.

[TinCanAlley]

Originally Posted by vol.2

I keep a big box full of old PCB ewaste for this. Usually can just find something in there if it's just a onesie-twosie.

A .01uf ceramic will say 103 on it. Very, very common on lots of boards. Should be able to use a film or lytic there as long as it's 100V.

Now I am upset I didn't keep more boards from scrapped equipment.