![]() |
|
|
|
#1
|
||||
|
||||
|
.
Hi! I would check Q505, & Q506 also. And Sony's are very strange animals, If you replace a Horizontal Output transistor, it often has to be a Sony part of the exact number, not a replacement number. So be careful there.... Also there is that diode built into that Horiz. Output Transistor, so "Diode Test" might not be the best for that one.... And it's a Sony.... Also 2 of your scans are not that clear & hard to read and follow.... But good luck with the Sony..... And Yes, check voltages When that neon light comes on I bet something is turned off to prevent HV start-up.... Sony..... Also the neon light might be the reason your fuse did not blow 2nd time, Sony....... .
__________________
Yes you can call me "Squirrel boy" |
![]() |
| Thread Tools | |
| Display Modes | |
|
|