|
|
|
|
|
#1
04-12-2026, 03:59 PM
|
||||
|
||||
|
Here is a better shot of the nightmare waiting for me in the HV deflection control area, I test fit one new caps, just to se how it's going to go, someone has been there before, cold solder joints in the resistors, peaks, burned wires, burned Cap?
 I also snuck in a cameo of the new pin cap for the 21FJP22A. http://suzaku.live-evil.org/20260412_154430.jpg Still waiting for more adapt-a-caps, want to do the PWS section first.
__________________
=^-^= Yasashii yoru ni hitori utau uta. Asu wa kimi to utaou. Yume no tsubasa ni notte. いとおしい人のために 
|
|
#2
04-12-2026, 04:32 PM
|
||||
|
||||
|
Nightmare? That looks as nice as open as I've ever seen.
|
|
#3
04-13-2026, 08:21 AM
|
||||
|
||||
|
Quote:
If you want to see a nightmare find a 1942 Zenith Consoltone bakelite table radio, or some of the Silvertone table model radio-wire recorders....Darn things are full of brittle rubber wiring and have caps so buried under other parts you have to partially dismantle the circuit to do a recap, and everything you touch cracks insulation off the wires (the chassis are wired like someone decided to fit 15lbs of crap in a 5lb box)... it's like playing the game operation on hell difficulty mode by comparison. Touch one thing and you're replacing every wire.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Hybrid Mode
