7” electrostatic set deflection shortcomings

[bandersen]

Wima caps should be fine. I've used them in several sets.
Did you replace all the resistors in the HV bleeder network down to the vertical deflection plates?

[CJVx]

Originally Posted by bandersen

Wima caps should be fine. I've used them in several sets.
Did you replace all the resistors in the HV bleeder network down to the vertical deflection plates?

I didn’t replace them but they do measure within their tolerance. There has been a ton of out of tolerance resistors on this set but everything I have found has been replaced. Every resistor on the vertical and horizontal amps have been replaced, and most others on the oscillators.