My CTC9 made it! :)

[Jonathan]

Steve,

Thanks, I see it now.

I have some pics taken with a hacked one-time-use digital camera. This camera, despite costing $11, really takes good pics. Anyway, here they are:

Electrolytics and Video IF PCB
Underside of chassis, notice the long yellow delay line
Underside, notice the black axial electrolytic, the red drop cap from Sprague, and the glass bulb, which is the colorburst crystal

I'm going to change the black electrolytic as well as the vertical cans, but the Sprague red drop-looking caps, are they usually pretty decent? Also, can I change out the colorburst crystal with a motern one and have more stable color or won't it make a difference?

Close up of previous pic
close up of upper part of underside, notice the long yellow delay line, colorburst crystal, and black axial electrolytics
Wider view of chassis underside
Top side of chassis
Close-up of chassis topside, notice the "Elemenco" paper/wax caps
Close-up of tuner, volume/power/color control, notice the "Elemenco" paper/wax caps
Close-up of back section. notice the tan butterscotch colored electrolytic on the PCB next to the square power transformer
Close up of front section, notice the flyback in good-looking contition, and the red drops connected to the flyback windings, do these need replacing?

This is a VHF only set I think, but it has a "U" on the dial, and the outer dial rotates I think, but I'm honestly not sure. It definately is a Felton though.

Thanks.

Jonathan