CoLoR fish tank

[polaraman]

The model number was posted in the listing. It is a CTC 11. Model number is 212 G 916 RV. What does the RV mean?


polaraman

[polaraman]

I just got back from picking up the set. It is a CTC 11E. The CRt was replaced with a Sylvania on 5-5-77. It is Testing good on all three guns. The red was really slow to come up to the green level. It is up there and staying there now. The assumptions were right!!! THIS IS A REMOTE CONTROL SET!!!!! The 6JE6 has air in it. The cabinet is in beautiful condition. There is not a bad mark on it. I will post some pictures tomorrow. Anybody got a picture of the remote. Need to hunt one down.

polaraman

[polaraman]

My joy of finding a remote set was short lived. There are some wires cut and some gears missing. I also think I am missing something else. What is it? There is a unused socket for a plug that goes some place. Where does the cable from the remote sensor attatch to? Any help on the missing parts would be greatly appreciated.


polaraman

[frenchy]

Originally Posted by polaraman

My joy of finding a remote set was short lived. There are some wires cut and some gears missing. I also think I am missing something else. What is it? There is a unused socket for a plug that goes some place. Where does the cable from the remote sensor attatch to? Any help on the missing parts would be greatly appreciated. polaraman

On my CTC-10 there is a separate amplifier chassis in the set, a bunch of fine wires run from that geared area to that amp via a molex plug. Also the sensor plug plugs into that amp. Is the amp in there? I would bet (but am not sure) that the remote control that would go with it is the same one I have, the fancy gold one with 6 small buttons and one channel bar, same basic controls set up as mine, the remote in this video:
http://www.archive.org/details/NewSeven1959
There should be a nice sized motor in those gears somewhere that drive all the other gears but can't tell if your's is missing or it's just a different design than mine and the motor is hidden in there. On mine the motor is to the left of that geared area. If you want some pics let me know and I'll snap what you want. At least on mine they just disabled the remote by pulling a few tubes : ( Good luck...Frenchy