Zenith 19EC45 Vertical Problem?

[jblmar]

Thanks to all for your help. The board is a 9-147. C701 measured open. The problem is still there. I can't check the set with the 9-92 schematic since they are different. Anyone have or know where I can get the 9-147 schematic. I don't have the time to trace the foil side, so the schematic would be handy.
Thanks again to all for your help.
Ron

[kx250rider]

Originally Posted by jblmar

Thanks to all for your help. The board is a 9-147. C701 measured open. The problem is still there. I can't check the set with the 9-92 schematic since they are different. Anyone have or know where I can get the 9-147 schematic. I don't have the time to trace the foil side, so the schematic would be handy.
Thanks again to all for your help.
Ron

I'd try the Sams for a later chassis; F or G (25FC45, etc). I can't remember where the cutoff is for the changeover to 9-147, but it was early in the Chromacolor series.

Charles