Sylvania roundie

[Charlie]

Hey Rich,

What's the latest on the other Sylvania? Is it near finished?

[polaraman]

I am up to mounting the CRT in the cabinet. I will do the electronics next. The move but a damper on my efforts with the set. It is on my list to be completed first.

polaraman

[polaraman]

This project was put off due to my move last January. I finally got the urge to get the set out and get started on it again. A lot of the pictures were lost in the server crash. I will post a few to catch everybody up. SAMS is 759-4. The chassis is on my work bench. I decided to hook it up to the test jig and try it. I got a boat load of sparks from the bottom of the chassis. Pulled the plug real quick on that issue. I will order the lytics next week. I have the original chassis and another parts chassis for parts. The three should give me a good chassis.

PIC of the finished cabinet.
pic of the face primed and ready for paint. I had to sandblast and sand it smooth due to corrosion. The painted face is ready for the grillcloth. I will get that from tubesandmore.com


polaraman

[polaraman]

I used the 1/4" oak plywood sheet sold at Home Depot. The original was the faux woodgrain masonite.

The cabinet was stripped down to the frame and rebuilt. I also had to replace the moulding on the top front of the set. I found the exact moulding at Home Depot. It was 1/4" thinner though. I used a strip of the oak playwood the make up the difference.

The Gold and Silver are Plasti-Kote Classic Metals. They are a dead ringer for the original paint. The gold is 884 Gold Mist. The Silver is 887 Burnished Silver. They come is 6oz spray cans.

polaraman