What's this RCA yoke go to?

[Pete Deksnis]

Quick reality check: Andy, a CT-100 yoke uses seven of the eight pins on the connector. Pin 6 is blank. There appears to be one wire short in the picture. The mounting bracket also seems to be different from a production run set. A CTC4 should use all eight pins. Maybe that leaves you with a CTC5 yoke?

[kx250rider]

Originally Posted by Pete Deksnis

Quick reality check: Andy, a CT-100 yoke uses seven of the eight pins on the connector. Pin 6 is blank. There appears to be one wire short in the picture. The mounting bracket also seems to be different from a production run set. A CTC4 should use all eight pins. Maybe that leaves you with a CTC5 yoke?

Agreed... If for no other reason than the CTC-5 was a MUCH bigger production run than all the previous color sets combined. Hence more parts lying around. Thanks for noticing the wires & pins used... It was late & I didn't think to look at that BUT I did notice that the wires are plastic, and the CT-100 has asbestos/cotton wires on the yoke if I recall.

Charles