50T yoke and crt frame

[chipper]

Will this yoke work for the 48philco 1000 chassis?

[Penthode]

When I am trying to cross reference, I have found this website useful:

http://www.bunkerofdoom.com/xfm/index.html

This site includes a number of Stancor, Triad, Thordarson etc catalogs which provides coil resistance, inductance, deflection angle and TV part numbers which helps determine equivalent.

It might take a little digging. I also find the Sams TV set documentation for replacement parts useful.

[cbenham]

Originally Posted by chipper

Will this yoke work for the 48philco 1000 chassis?

You can probably use the 50T yoke in the 48-1000. The CRT mount for the 1000 is slightly different than the one for the 10 inch 50T, but it is very close.
You can see pictures of both sets with schematics on the Early Television Foundation Schematics pages.

http://www.earlytelevision.org/tv_sc..._diagrams.html

There are both 10 inch and 12 inch Philco 50T sets. The yoke is the same in both size sets as is the chassis electronic design, mostly.

The Stancor cross reference indicates the same part numbers for both the yoke and the flyback for the 50t series and the 48-1000. Yoke DY1-A, Flyback A-8127. These are Stancor replacement part numbers.

Best Luck,

Cliff

[Big Dave]

The yoke will work. I know somebody that has 2 10" CRT frames. PM me for more info.

[chipper]

HEY: Thanks for the info , now I need to find a cabinet?