Motorola Quasar Part needed

[julianburke]

23EGP22's were never used in a quasar. A 25XP22 or equivalent will work nicely in it's (23") place. There was a modification kit available for the upgrade which included shaving the bezel to accommodate the new 25. We only did 2 of these back then.

[kc8adu]

nice to know this.i have a regular from when i was a teen who wants me to change a crt in an early motorola with a 23egp22.yes they still watch the set.i shot it about 5 years ago with my 467.its pretty sick again.after the rejuve it looked ok but it was soft and red was poor on bright scenes.
i have a brand new rca 23v sitting here that may go in it.they have owned the set from new in 1964!

Originally Posted by julianburke

23EGP22's were never used in a quasar. A 25XP22 or equivalent will work nicely in it's (23") place. There was a modification kit available for the upgrade which included shaving the bezel to accommodate the new 25. We only did 2 of these back then.

[kc8adu]

btw static convergence on your set is done with those disc magnets under the spring clips on the 3 ends of that assy.

[dieseljeep]

Originally Posted by julianburke

23EGP22's were never used in a quasar. A 25XP22 or equivalent will work nicely in it's (23") place. There was a modification kit available for the upgrade which included shaving the bezel to accommodate the new 25. We only did 2 of these back then.

I bought a conversion kit from the E place. I'm not impressed by the recommended mounting proceedure. The brackets they furnished aren't designed to carry the weight of CRT. I'll take the hardware from a scrap set see what be done.