Motorola 17T13

[dieseljeep]

Originally Posted by JohnCT

Did you try reflowing the filament pins on the base?

In a related story, my dad used to carry a small tool in his pocket for fixing intermittent or dead elements on the old CRTs that used the old phenolic bases, from B&W right through the 21AP color.

It was a small rectangular piece of brass (like two inches of a wide carpenter's pencil) with a hole drilled down the center just large enough to slide down and over any single pin of the crt socket. There was a thin slice opened on one side of the tool and a handle that would fit in the slice and pivot from the end of the tool.

So dad would slide this over the wayward pin (tight fit) and flip the handle into the slot and press down. What it did was crimp the pin, and the tight fit of the tool meant the pin kept its overall round shape.

I have that tool somewhere. If I can find it, I'll post a picture of it.

John

A Burns Perfect Pin Crimper. I had one years ago.

[Boobtubeman]

I was searching google when it showed me this thread... I think theres another topic about another 17T13 here as well concerning a 16 inch CRT.. Not sure where mine falls into all the incarnations of this set, but i do know the CRT is metal..

SR

[Boobtubeman]

Pins are fine... filament is toast... Tv came with a brightener attached, Extremely dim picture, and ZERO emissions.. Filament gave up the ghost during a gun cleaning attempt.. Tv had sound and static when rotating tuner. and V&H sweep from what i could see.. I have frenkensteined CRTs before, this is my first metal attempt.. I was told the GP4 would fit the bezel the best, dont wanna chop up the bezel if i can avoid it..

SR

[Popester]

Maybe ETF could do a rebuild on it someday???

[Robert Grant]

Originally Posted by bandersen

I friend just dropped of this set he picked up down in the Champaign/Urbana, IL area. The owner ssid it had been in his family since 1952.
I don't think that's possible though since it has UHF and the inspection tag says Sept, 1953.

It's a 17" set in a black bakelite (or is it plastic ?) cabinet. Rather light since there's no power transformer.


Odd that his dad would get a set with UHF way back then. Did they have UHF in downstate IL back then or could he have picked it up from Chicago ?


It has a TS-410 chassis.


Uh-oh, that doesn't look good
Sure enough - the 17HP4 is dead


That's a shame it was replaced with a Sylvania Silverscreen 85 in 1963.

The Peoria market was a UHF island, and the Rockford and Champaign markets had singleton VHF stations with multiple UHF network affiliate stations.

[bandersen]

Something like this? http://www.videokarma.org/showthread.php?t=258473