Quote:
Originally Posted by Alex KL-1
Just to be on the safe side, is good to check or sub the pulse H cap (or resonating/efficiency cap). Is one generally having one pin to collector of HOT and another to ground (like the ceramic cap), in the board. It have values in the vicinity of 6 to 12nF, with at least 1600V of WV. A failure with that, and the HOT shortens out.
|
I just checked the cap list I'd made, there are no capacitors in the TV that are in the realm of 1600v. I will check again since there are four 160v caps used and there might've been a read error.
04-09-2024, 08:43 AM
Threaded Mode