Toshiba Model M-632 VCR giving fits

[centralradio]

Originally Posted by Captainclock

I can get a shot of the insides of this VCR.

Yes It looks the same as my two here.Check the idler assembly and see if its ok and not chewed up.I had two go on me in each VCR.Also replace the belt in it too.

Originally Posted by dieseljeep

I've repaired many lightly damaged video tapes. They're easy to take apart and re-splice. You don't lose much of the content.

Yes I dont really like it but Ive done that too.

[Captainclock]

Originally Posted by centralradio

Yes It looks the same as my two here.Check the idler assembly and see if its ok and not chewed up.I had two go on me in each VCR.Also replace the belt in it too.


Yes I dont really like it but Ive done that too.

I've looked at the idler gear assembly and it looks to be intact yet, I think it might be mainly a belt issue, but not sure until I can find out what the size of the belts are that this VCR needs because I looked over at SMC Electronics supply and their supply of belts go by the belt diameter and not necessarily by make and model of VCR.

[centralradio]

Originally Posted by Captainclock

I've looked at the idler gear assembly and it looks to be intact yet, I think it might be mainly a belt issue, but not sure until I can find out what the size of the belts are that this VCR needs because I looked over at SMC Electronics supply and their supply of belts go by the belt diameter and not necessarily by make and model of VCR.

Thats great the idler is OK.I would try a belt from another VCR if you have any non working VCRs there that you can salvage one off it.As long its a hair tighter then the bad belt .You dont want one too tight.It will put a load on the capstan motor and could burn it out.It should work until you find a new replacement.Atlease you will find out if the mechanism works ok with out chewing up your tapes.BTW ..Use a tape that you dont care if the VCR eats it.upI use 2 pencils and gently move the pencils out and see which one is smaller and use it.Just remember which belt is the original.If the original is smaller.Just keep looking until you find one a hair smaller then the original .Thats the quick way in finding one that works.Also you can measure the belt by stretching it out on the ruler like on the SMC site shows.

http://www.smcelectronics.com/vcrrep.htm

[Captainclock]

Originally Posted by centralradio

Thats great the idler is OK.I would try a belt from another VCR if you have any non working VCRs there that you can salvage one off it.As long its a hair tighter then the bad belt .You dont want one too tight.It will put a load on the capstan motor and could burn it out.It should work until you find a new replacement.Atlease you will find out if the mechanism works ok with out chewing up your tapes.BTW ..Use a tape that you dont care if the VCR eats it.upI use 2 pencils and gently move the pencils out and see which one is smaller and use it.Just remember which belt is the original.If the original is smaller.Just keep looking until you find one a hair smaller then the original .Thats the quick way in finding one that works.Also you can measure the belt by stretching it out on the ruler like on the SMC site shows.

http://www.smcelectronics.com/vcrrep.htm

yeah I still have two of the 3 original belts yet, I actually had several old VCR Belts laying around in my parts bin stash but only one of the belts was the correct size for what I needed (the biggest belt on this VCR) the other two belts were too small compared to what I had belt wise laying around, bad part is that I don't seem to have a ruler right now, so I can't measure anything right now, I have a couple of tape measures laying around but those won't work very well.

[centralradio]

Originally Posted by Captainclock

yeah I still have two of the 3 original belts yet, I actually had several old VCR Belts laying around in my parts bin stash but only one of the belts was the correct size for what I needed (the biggest belt on this VCR) the other two belts were too small compared to what I had belt wise laying around, bad part is that I don't seem to have a ruler right now, so I can't measure anything right now, I have a couple of tape measures laying around but those won't work very well.

I would keep an eye open down at the Goodwill or at curbside for VCRs for belts.For $5 bucks .Its probably cheaper getting the belt that way then ordering one online after they hit you with the inflated shipping rates.I remember the old MCM electronics catalogs had a belt measuring gauge in them .You always can get a new belt if the Toshiba works great with the used test belt.

[Captainclock]

Originally Posted by centralradio

I would keep an eye open down at the Goodwill or at curbside for VCRs for belts.For $5 bucks .Its probably cheaper getting the belt that way then ordering one online after they hit you with the inflated shipping rates.I remember the old MCM electronics catalogs had a belt measuring gauge in them .You always can get a new belt if the Toshiba works great with the used test belt.

The bad part is that I had for a while an early 1980s Hitachi top loading VCR that ended up having more wrong with it than I could repair so I salvaged all but one of the belts out of the machine and the one belt I forgot to get out of the machine would of worked for the rear loading mechanism assembly (the loading mechanism for loading the tape into the heads.)

[centralradio]

Originally Posted by Captainclock

The bad part is that I had for a while an early 1980s Hitachi top loading VCR that ended up having more wrong with it than I could repair so I salvaged all but one of the belts out of the machine and the one belt I forgot to get out of the machine would of worked for the rear loading mechanism assembly (the loading mechanism for loading the tape into the heads.)

Yes.I understand that happening after getting rid of stuff.Two months down the road you need something off it.It happens all the time here.All of us are in the same boat on storage issues with little or no room to store everything.I'm out of room here and still taking in CRT TVs here like a 25 inch Panasonic and a Sanyo 19 inch set that I took in in the past week.I probably have enough 25 inch sets here to stack them up to make the Jeopardy game show set in my living room.All I need is Alex and his contestants .