Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)

- Early B&W and Projection TV (http://www.videokarma.org/forumdisplay.php?f=19)

- - Need Emerson schematic (http://www.videokarma.org/showthread.php?t=11317)

Eric H

11-09-2003 05:38 PM

Need Emerson schematic

The Sam's I have (46-25) for my Emerson 571 is for an earlier/later chassis and doesn't show the ballast tube.

Does anyone have a different schematic for this set that does show the ballast?

I could use a scan of the power supply section.

Eric

Steve K

11-09-2003 06:12 PM

1 Attachment(s)

Eric:

Is this the one you need?

Steve

Steve K

11-09-2003 06:16 PM

Now it would probably help to have the values!

R47 and R48; 10 ohm 3 watt wirewound
R49 and R50; 75 ohm 5 watt wirewound
R103; 75 ohm 3 watt wirewound

Eric H

11-09-2003 07:53 PM

Steve, that's it!
Thanks a million! :D

Eric

wiseguy

11-11-2003 02:25 PM

hi eric,i found that ballast,it is the correct one you need,and is brand new in the box,nice and black and shinny..!
i checked the pins to make sure..
sorry it took me a few days to dig and find it,i will send it to you..
terry

Eric H

11-11-2003 03:32 PM

Thank you Terry, that will make the job so much easier if I don't have to hang a bunch of resistors all over the place :)

All times are GMT -5. The time now is 04:24 AM.