Videokarma.org TV - Video - Vintage Television & Radio Forums

Videokarma.org TV - Video - Vintage Television & Radio Forums (http://www.videokarma.org/index.php)
-   Solid State CRT Televisions (http://www.videokarma.org/forumdisplay.php?f=184)
-   -   Hitachi CT-1909 (http://www.videokarma.org/showthread.php?t=255163)

mrflex65 08-02-2012 03:46 PM

Hitachi CT-1909
 
4 Attachment(s)
It's been awhile folks,found this Hitachi CT-1909 19" set from '80. It's filthy,but it should clean up pretty nice! Can't say so much for the remote though.:no: Anybody here familiar with this set? Looks to be well built..:yes:

mrflex65 08-02-2012 04:14 PM

3 Attachment(s)
A few more pics.....

zenithfan1 08-02-2012 06:22 PM

I like it! Hitachi built a lot of good sets back in the day.

Electronic M 08-02-2012 08:56 PM

Looks like there used to be a chrome keypad insert on the remote.

mrflex65 08-03-2012 05:42 AM

Quote:

Originally Posted by zenithfan1 (Post 3043651)
I like it! Hitachi built a lot of good sets back in the day.

I really like this set! I'm going to hang on to this one.:yes:

mrflex65 08-03-2012 06:01 AM

Quote:

Originally Posted by Electronic M (Post 3043676)
Looks like there used to be a chrome keypad insert on the remote.

Yes, the keypad insert is missing along with the battery cover and corroded batteries to boot! It's a goner...:tears: From what i understand, they still have some replacement remotes for this set....:scratch2:

DavGoodlin 08-03-2012 07:42 AM

I had to repair one of these for a friend when I was only good on Sony (not boasting here, I worked for 2 Sony dealers so I HAD to do them right)

The Hitachi had "Jail bars" on the left side of the picture. Still under the impression a 3 year old TV couldn't possibly have a bad capacitor, I wasted lots of time before a bad 47 mf(?) 250 volt cap was found on the CRT PCB? on the CRT's G2 supply line. This allowed horizontal-rate ripple to modulate the G2 voltage and cause the odd symptom.

Once done, it looked great.

mrflex65 08-03-2012 10:30 AM

5 Attachment(s)
Ok, got a chance to clean it up and pop off the back cover. Not too bad inside! just a little compressed air and it's done.:yes:All i have to do is some detailing on the front and that should do it.:yes:

Dave,i didn't see that cap on the crt board.I guess maybe on the main pcb?:scratch2:

mrflex65 08-03-2012 10:34 AM

3 Attachment(s)
A few more.

Dreamsbeard 12-06-2014 09:05 PM

Well this looks familiar!

zeno 12-07-2014 08:22 AM

The cap is a good one to learn. Its common to almost
all SS sets & has a high fail rate.

To find it: on CRT board the 3 color output collectors go through
apx a 15K or 18K 1 or 2 W resistors. Where they join is the 200
volt source. Follow the wire from that to the main PCB. You
will find it there. Usually a 4.7 mfd sometimes a 10 mfd.
Change to a 450 volt. Usually near the flyback.

Symptoms are a mix of jail bars, smearing, dark on
left to bright on right, bright blank raster, retrace, shading Some
sets will go into overcurrent shutdown also.

73 Zeno:smoke:


All times are GMT -5. The time now is 03:11 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.