|
I do not recognize the readings. The CR 70 has fixed g2. The cutoff is set with a variable control that I assume produces a specified cathode current. Under full emissions test g1 is raised and the tube is good if the cathode current tracks the increase in bias. The CR 70 is largely a go / nogo tester. It does have an aging test, which measures the drop in emissions with reduced heater voltage. A good tube will drop very little.
Relevant measurements would be the position for RGB of the g1 in the cutoff set mode, and the cathode current in emissions test.
__________________
A stereo can work and it can play.
SOTA Sapphire, Lustre arm, AKG mc
Yamaha C85 , C1
Carver TX-11a
Kenwood L-07MmkII , Yamaha B1 + UC1
DCM Time Windows ADS 200 IMF TLS80
Revox B77 Nak 680 pioneer CLD97
|