Quote:
Originally Posted by Tom Albrecht
I also checked the screen voltage during the emission test on my CR-70:
Red screen: 259 V
Green screen: 188 V
Blue screen: 225 V
|
Tom,
Checked the screens of my 'benched' CTC2 and came up with:
B8000194
G2
R 389
G 344
B 345
As you can see the levels are quite a bit higher. Although there are six feet of extra wire on the 15G, the 'bench' operation is normal and did not require a basic set up. Also, I dug up an unfinished CTC2 setup procedure from 2009 that never got put on my CT-100 site before it went down. Added some stuff and posted it here on AK:
http://www.videokarma.org/showthread...98#post3093798
Pete