Quote:
Originally Posted by Electronic M
The original backs give plenty of ventilation. What I'd do is drill a few holes in the base of the HV cage and a install a fan at the too to draw hot air out. If you're really worried about too much hot air in the cabinet hook a fan to the top inside of the back blowing out.
You can bust the CRT neck way too easily without the back on.
|
I'm thinking of doing that to mine, once everything is all done, but I can't decide on an ac or a dc fan, would brushless dc fan be OK with all the RFI and xrays in that cage? or would AC be better?