|
|
|
#26
04-29-2019, 02:10 PM
|
||||
|
||||
|
The original backs give plenty of ventilation. What I'd do is drill a few holes in the base of the HV cage and a install a fan at the too to draw hot air out. If you're really worried about too much hot air in the cabinet hook a fan to the top inside of the back blowing out.
You can bust the CRT neck way too easily without the back on.
__________________
Tom C. Zenith: The quality stays in EVEN after the name falls off! What I want. --> http://www.videokarma.org/showpost.p...62&postcount=4 
|
|
|
Threaded Mode