.
Quote:
Originally Posted by timmy
Would v6 have anything to do with this color issue because I have a resistor on pin 8 2.7meg but it’s up to 3.9meg , Searching for any other bad resistors.
|
Do the math it's 44.4% off, so unless there was a cheapo bin for 44%
tolerance resistors, & ok'd for use in that set, that one is out of spec.....
Of course replacing it won't fix it...... Just being the depressed
robot from Hitchhikers Guide to the Galaxy.....
This set can be fixed without a scope.... I'm not too sure I would
worry about switched wires on the flyback either, remember
it was working as it's currently wired.....
..