[TinCanAlley]

New question. I don't want to pull it again, but I find that the SM doesn't have anything on my tuner setup other than the remote board. I have no clue if the non turret schematics are for mine or not. I had it out months ago to fix the power on/off issue. I replaced all the trigger caps and other electrolytics on the board and it fixed the issue. I was just going over some pics I took and noticed that there is another board in the tuner/remote assembly and it has three electrolytics on it. I don't know if it's a board connected to the tuners or the board used for the channel tuners on the front side.

While on the subject of tuner, does an OEM IF module come pre-adjusted, or is that something that is done once installed and connected to the tuners?

Also attaching a pic of a piggybacked resistor that came in a batch of Zenith parts I got. It came in a plastic bag with no real indication on what it meant for.