|
|
|
#11
04-15-2026, 05:38 PM
|
||||
|
||||
|
New question. I don't want to pull it again, but I find that the SM doesn't have anything on my tuner setup other than the remote board. I have no clue if the non turret schematics are for mine or not. I had it out months ago to fix the power on/off issue. I replaced all the trigger caps and other electrolytics on the board and it fixed the issue. I was just going over some pics I took and noticed that there is another board in the tuner/remote assembly and it has three electrolytics on it. I don't know if it's a board connected to the tuners or the board used for the channel tuners on the front side.
While on the subject of tuner, does an OEM IF module come pre-adjusted, or is that something that is done once installed and connected to the tuners? Also attaching a pic of a piggybacked resistor that came in a batch of Zenith parts I got. It came in a plastic bag with no real indication on what it meant for.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
|
|
Threaded Mode