Quote:
Originally Posted by pac.attack76
Ok, weird. Pulled board out and figured I'd put the old one in to see what happens. Had to set color and tint but here's what I got. Should I look at anything else before I close it up?
|
If it we me, I would pull and test every component on that little board, and replace anything that is out of spec (usually 20% for most components, maybe 10% for important resistors). The main concern I would have there is that the color board has an IC on it that could get stressed if some of the components have drifted too much, and that could be hard to find a replacement for it if it dies. 1970s ICs do not have a reputation for robust lifespan.
Also, your convergence is atrocious, so I would definitely dial that in with the yoke first. Caveat that yoke carries lethal voltages, so proceed at your own risk. Do whatever you have to do to learn how to handle it before you do anything.