|
One more thing, I mentioned dynamic convergenc. This involves all the controls on that small board in the upper left of the set. For now do not turn any of them. You will find the dynamic convergence procedure in a Sam's Photofact set or service manual for that chassis. There are about thirty steps and all the controls interact with each other. Dynamic convergence will clean up the convergence at the edges of the picture. Often once the static convergence is done the dynamic will be fine. You will likely never get it perfect all the way to the edges. Your eye will not notice slight misconvergence at 6 feet or so away anyhow.
Bill R
|
09-29-2008, 11:09 PM
Threaded Mode