Mighty Monarch of The Air

[vts1134]

I took an early day at work to spend some time on the set tonight. I also read through this entire thread a couple of times to come up with a game plan of tests for this evening. Here is what I'm thinking.#
I'm going to recheck the vertical height control selector.#
I'm going to check voltages on v13 and v14. I will connect my lead clips to the set and to my meter, then fire the set up for a measurement. After taking a measurement I'll remove power from the set and move on to the next voltage measurement.#
I'm going to disconnect both primary leads on my new t2 and connect them to the two leads on my variac. I'll fire the set up and turn up the variac to line voltage or robust deflection, which ever comes first.#
If deflection does not occur I will move on to OC's next suggestion of driving the coils directly with the variac. On this test I'm a bit hazy on. There is only one lead from the yoke on the vertical side. What would I do with the other lead on the variac?
After completing those test if I have time I'll move on to more.#