Quote:
Originally Posted by Chris K
I went back to the very beginning to work my way through and I ran into an issue with one of the trap adjustments. For all of the traps, I could stay on either the 1.5 or 5 volt setting on the VTVM and tune the slug for minimum voltage. I’m not with the TV right now so I can’t relay specifics but after cruising through 3-4 slugs, I ran into one where I had to up the VTVM scale to 50V DC to find a range where I could adjust for a minimum. That’s probably indicative of an issue wouldn’t you say?
|
The issue which happens with this chassis is that if the circuits are not stagger tuned, there is the chance of feedback. The loss of proper stagger tuning comes when someone adjusts a circuit and are not sure what they are doing. I have received sets like this. And the cure is straight forward especially with the precise equipment you are now using.
I will wait for more details so I can be sure what is going on.
09-15-2024, 07:55 PM
Threaded Mode