Ok. Let’s try this again…RCA 9TC240 Alignment - Videokarma.org TV - Video

		Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV
Ok. Let’s try this again…RCA 9TC240 Alignment

Notices

Time to get this site upgraded, so we are passing the hat around. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html


	We appreciate your help in keeping this site going.

Thread Tools

Display Modes

#11

09-17-2024, 01:09 PM

Penthode

VideoKarma Member

Join Date: Jun 2009

Location: Kitchener/Waterloo Ontario Canada

Posts: 1,462

Quote:

Originally Posted by Chris K

No I didn't think so. I was injecting the frequencies at around 200mV into V2 Pin1 through the 1500pF cap. I was not getting swings anything like 1.0-2.0 volts DC. Is 200mV not strong enough???

200mV is way too low. I would go back and increase the RF signal applied.

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 09:58 AM.