Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-16-2009, 12:47 PM
Reece's Avatar
Reece Reece is offline
VideoKarma Member
 
Join Date: Jul 2004
Location: Cleona, PA
Posts: 2,178
A few things you can try. In many cases, the tubes are still all OK. With the set off, get some CRC electronic cleaner at an auto parts store. Take out a tube, squirt a little on tube pins, then plug in and out of the socket several times. Do all the tubes one by one so you're sure to get them back in the correct sockets (are they in the correct sockets now??) If the set doesn't work after that, stop at this point. Even if it does work, don't play it except for a minute but see next paragraph.

It's not a good idea to leave an old set on until it has been gone over and certain inexpensive parts (capacitors) replaced which can suddenly short after fifty years and take out some virtually irreplaceable parts. As Ticntoc said, need to know your location.
Reece
__________________
Reece

Perfection is hard to reach with a screwdriver.
Reply With Quote
  #2  
Old 03-04-2009, 02:10 PM
guitardude guitardude is offline
Noob
 
Join Date: Feb 2009
Location: Western N.C. 4 now
Posts: 4
thanks for the replies!

Quote:
Originally Posted by Reece View Post
A few things you can try. In many cases, the tubes are still all OK. With the set off, get some CRC electronic cleaner at an auto parts store. Take out a tube, squirt a little on tube pins, then plug in and out of the socket several times. Do all the tubes one by one so you're sure to get them back in the correct sockets (are they in the correct sockets now??) If the set doesn't work after that, stop at this point. Even if it does work, don't play it except for a minute but see next paragraph.

It's not a good idea to leave an old set on until it has been gone over and certain inexpensive parts (capacitors) replaced which can suddenly short after fifty years and take out some virtually irreplaceable parts. As Ticntoc said, need to know your location.
Reece
I am in Western North Carolina near upstate South Carolina about 3 hours north of Atlanta and an hour south of Asheville.
Reply With Quote
  #3  
Old 03-11-2009, 06:14 PM
guitardude guitardude is offline
Noob
 
Join Date: Feb 2009
Location: Western N.C. 4 now
Posts: 4
anyone??

Reply With Quote
  #4  
Old 03-14-2009, 04:47 PM
jonboy55's Avatar
jonboy55 jonboy55 is offline
VideoKarma Member
 
Join Date: Sep 2008
Posts: 136
Usually it's not the tubes that are bad in these radios. Most likely some capacitors. You really need to know what you're doing when fixing these radios. Not only that, but they are tempermental. Also it's hard to find schematic diagrams.

If you send it somewhere it will probably cost more then the radio is worth.

Here are some pictures of my 2035.

Let me know if you have any questions.

Good luck.
Attached Images
File Type: jpg grundig 2035 b.jpg (80.1 KB, 7 views)
File Type: jpg grundig 2035 a.jpg (91.6 KB, 19 views)
Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 05:51 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.