|
|
|
#10
10-30-2014, 06:18 PM
|
||||
|
||||
|
since the lines started it has got worse no better so when this problem started i looked into things to try to find out what may have been causing it. i didnt make any changes just that i pulled the chassis the other day to check caps , resistors, ect. the kine bias pot is 6k and measures good that was the first thing i checked. so then i should leave the.1 cap and the .022 paralled in place for the.12 that the sams says and what i took out.
|
| Audiokarma |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode