Why no love for this GE roundie ?

[tvcollector]

Assuming I have the meter in the right place seeing how I'm getting readings that make sense.... It measured 170ma, as I dialed in the horizontal, the meter jumped to around 195 - 200ma.. Still the normal range.. I did go past the 215ma and powered the set off real fast and then backed off the opposite direction.. It's now in locked position with meter reading around 195ma. Now I hear a slight pop noise of static electricity every few seconds around the fly area.. The picture is black and white, as i suspected seeing how the scrambled out of horz pic looked, and also real blurry...

Update: I turned down all the drives to about mid way and the picture is much better in focus.. alot of green and blue off images and alot of noise in the picture.. I tested one of the tuner tubes and it's also a questionable tube.. Horizontal and vertical seems to be fine.. HV pop noise went away.. Vertical has good range and locks in the middle.. Color and tint do nothing, though slight crackle in the speaker when adjusting..

Seeing how I'm still new to all this.. I have no idea where to go next.. I suspect this will need a recap.. The electrolytic cans don't get hot, but barely warm after a while..