Value Needed: Modifying A Daewoo CN-001M

[zeno]

http://www.ebay.com/itm/Daewoo-DVDS1...item339b2dd544

Since its a Daewoo universal odds are it will run everything.
You will need a code sheet unless it loses memory on battery removal.
Then usually it reverts to Daewoo BUT there may be more than one code.
Zenith also sold some Daewoo sets so try Zenith codes.

IIRC other sets with resistor ladders and keypads had more than one
input to the micro so a resistor may not work. Also the remote
comes in on another pin so the software may only see it from the
remote.

good luck
73 Zeno

[colectorad]

Thanks for the reply!

Originally Posted by zeno

http://www.ebay.com/itm/Daewoo-DVDS1...item339b2dd544

Since its a Daewoo universal odds are it will run everything.
You will need a code sheet unless it loses memory on battery removal.
Then usually it reverts to Daewoo BUT there may be more than one code.

If eBay were an option, the proper R-43A08 remote is readily available there.

Originally Posted by zeno

Zenith also sold some Daewoo sets so try Zenith codes.

On my Philips universal remote, they aren't any better than the Daewoo codes.

Originally Posted by zeno

IIRC other sets with resistor ladders and keypads had more than one
input to the micro so a resistor may not work. Also the remote
comes in on another pin so the software may only see it from the
remote.

Well, this is discouraging.