![]() |
|
|
|
#1
|
|||
|
|||
|
As a matter of fact I already do
![]() You're right about the CRT. The RCA & Emerson both use the 8DP4. I also have one of the 8" RCA sets but after what I've read they are a nitemare to service. It's on the way back burner for now but from what I remember it had a bright raster so if the Emerson CRT doesn't pan out......hmmmmm |
|
#2
|
|||
|
|||
|
Sourced a Vertical Output Xformer. Replaced a few wax caps, and after a few
control tweaks was rewarded with video & audio. Not perfect but watchable ![]() Good feeling to see it working again |
|
#3
|
||||
|
||||
|
Quote:
my college dorm room. My suitemate, however, had a CTC-7. Thye are not in fact hard to service. They are modular and the wires are long enough so they work disassembled. The only nasty problem I ever had was a bad socket for the HV rectifier, which I replaced with an NTE silicon one. |
|
#4
|
|||
|
|||
|
Well I decided to dig out my dormant RCA 8-PT-7012 to see what gives.
Just like before it still doesn't work very well ![]() So I'll be posting a thread of its own |
![]() |
| Thread Tools | |
| Display Modes | |
|
|