|
I put in a temporary 6BG6 tube, and got light on the screen...
figured i'd replace about 8 resistors that were not close in spec... now I get nothing.
So frustrating...
I have learned with electronics it can usually be a very simple overlooked item, like the wrong value resistor, bad soldering job, etc...I have rechecked my work over and over.
I even went ahead and put back the old resistors just to see, still nothing.
In the future I think I'll replace one component at a time and see if ieverything still works before proceeding...
|
04-26-2020, 04:36 PM
Threaded Mode