1988 Emerson 19" model ECR2100D dead - Videokarma.org TV - Video

		Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions
1988 Emerson 19" model ECR2100D dead

Notices

Time to get this site upgraded, so we are passing the hat around. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html


	We appreciate your help in keeping this site going.

Thread Tools

Display Modes

03-11-2024, 06:12 AM

Alex KL-1

VideoKarma Member

Join Date: Jan 2021

Location: Brazil (Paraná)

Posts: 515

Normally the regulator is at the mains wiring input, after fuse, diodes and big cap for filtering; then it follows to regulator. It drives an transformer or a inductor (if it is a SMPS; probably due to age of this TV). THe main regulator for sure will have a heatsink.
For testing it, is not advised to isolate them from load; most old SMPS explodes without load.

__________________
So many projects, so little time...

« Previous Thread | Next Thread »

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 05:40 PM.